FlexPoint is a large-format multisensor CMM designed to measure complex parts with both large-scale geometry and fine precision features in a single setup. It combines tactile scanning, telecentric video, and interferometric laser measurement on the VersaFlex multisensor head, allowing multiple measurement methods to be available at once.
FlexPoint is a true multisensor system, allowing tactile, optical, and laser measurements to operate together within a single inspection routine. For teams looking to streamline inspection workflows or transition from multi-system setups, our multisensor CMM solutions are designed to support complex measurement requirements.
This eliminates the need for re-fixturing, sensor changes, or moving parts between systems, helping maintain alignment and reduce interruptions throughout the inspection process.
Unlike traditional workflows that require multiple systems or sensor changes, FlexPoint keeps all measurement methods active within a single setup.
FlexPoint is designed for inspection challenges that typically require multiple systems, setups, or workflows. It is particularly effective in environments where part size, feature complexity, and measurement requirements intersect.
FlexPoint keeps tactile scanning, telecentric video, and interferometric laser measurement available simultaneously on the VersaFlex multisensor head. By keeping multiple sensors active at once, VersaFlex eliminates the need for change racks or requalification between measurements.
Because all sensors remain active within the same setup, part alignment is maintained throughout the entire routine, helping ensure consistency across every measurement.
Used for datums, bores, freeform geometry, and high-accuracy probing.
Ideal for small features such as tiny holes, edges, and delicate or hard-to-probe surfaces.
Used to capture surfaces, gaps, and dense point data, including reflective or complex areas.
These improvements are often supported by well-structured inspection routines and professional measurement services that ensure accuracy, repeatability, and efficient program execution.
FlexPoint is engineered for consistent performance in demanding production environments, not just controlled lab settings.
FlexPoint runs on ZONE3 CAD-based metrology software, allowing tactile, optical, and laser measurements to operate within a single program. Instead of managing multiple systems, your team works from one unified interface. ZONE3 also provides a graphical interface with visual validation and reporting, helping simplify complex multisensor inspection routines.
FlexPoint systems are available in multiple configurations to support a wide range of part sizes, weights, and inspection requirements. Each model is built on the same multisensor platform, with measuring volumes and load capacities tailored to your application. FlexPoint systems support a wide range of measuring volumes and part capacities, with configurations designed for both medium-sized components and large, heavy workpieces.
Compact footprint with measuring ranges suited for medium-sized parts and tight production spaces
Expanded measuring volume for larger components and increased flexibility across applications
Maximum measuring range and capacity for large, heavy parts and complex inspection requirements
FlexPoint systems offer configurable X, Y, and Z ranges, allowing you to match the machine to your specific part dimensions and workflow needs. Contact CMMXYZ if you need help choosing the series that best fits your needs.
The AGILITY L series represents the pinnacle of measurement precision for controlled lab environments. These systems deliver maximum accuracy for detailed inspection applications where environmental stability matters most.
FlexPoint supports a range of tactile and non-contact sensors, all integrated on the VersaFlex multisensor head:
All sensors operate within the same system and software environment, eliminating the need for separate inspection platforms.
Tell us your part size, feature requirements, and inspection goals, and we’ll recommend a FlexPoint configuration tailored to your workflow.
If your inspection process relies on more than one sensor type, FlexPoint simplifies the workflow by removing extra steps, reducing handling, and keeping everything within a single system.
FlexPoint systems are designed and built in the USA by OGP, with a focus on stable accuracy and reliable performance in real-world shop-floor environments.
Bring us your most complex part or send a CAD file. We’ll run a full multisensor inspection routine and provide a detailed report so you can evaluate cycle time, workflow efficiency, and measurement capability against your current process.
We also provide ongoing support through CMM repair and calibration services to help maintain system accuracy and long-term performance.
FlexPoint is a large-format bridge-style coordinate measuring machine built by OGP that combines tactile scanning, telecentric video, and interferometric laser measurement on a single VersaFlex multisensor head. It is designed to inspect large, complex parts containing both wide-scale geometry and fine GD&T features within one setup, eliminating the need to move parts between separate tactile, vision, and laser systems.
FlexPoint is a true multisensor system because all three sensor types — tactile, optical, and laser — remain active on the VersaFlex head simultaneously within a single inspection routine. There are no change racks, no requalification steps between sensors, and no re-fixturing of the part. Many machines marketed as "multisensor" only support sensor swapping, which breaks alignment and inflates cycle times.
A standard bridge CMM typically supports tactile probing only, sometimes with an optional laser scanner that requires a probe change. FlexPoint keeps tactile, telecentric video, and interferometric laser available at once on the same head, allowing one program to capture datums, micro-features, and dense surface data without interruption. This makes it well-suited for parts that would otherwise require two or three separate inspection systems.
FlexPoint is designed for large parts with small or mixed-feature GD&T requirements — components where overall part scale and fine feature precision intersect. Typical applications include aerospace structural components, large molds and tooling, automotive powertrain and EV battery housings, energy and turbine parts, and complex machined assemblies that combine bores, freeform surfaces, micro-features, and hard-to-probe edges.
FlexPoint supports three sensor families on one VersaFlex head: an SP25-series tactile scanning probe for datums, bores, and freeform geometry; a SmartProbe telecentric video system with selectable optics packages for tiny holes, edges, and delicate surfaces; and a TeleStar interferometric laser for capturing surfaces, gaps, reflective areas, and dense point clouds. All three sensors remain active simultaneously throughout an inspection routine.
FlexPoint runs on ZONE3, OGP's CAD-based metrology software. ZONE3 lets operators program directly from CAD models with embedded GD&T, execute tactile, optical, and laser routines from a single interface, reuse programs across similar parts and product families, and generate one combined inspection report across all three measurement types. The graphical interface provides visual validation that simplifies complex multisensor routines.
FlexPoint floor models are offered in three series. The 7 Series has a compact footprint suited for medium-sized parts and tight production cells. The 9 Series provides expanded measuring volume for larger components. The 12 Series offers the maximum measuring range and load capacity for large, heavy parts and complex inspection requirements. X, Y, and Z ranges are configurable within each series to match specific part dimensions.
Shops typically see up to 25–50% fewer setups on large parts with fine or complex features and 30–40% faster inspection cycles by removing sensor changeovers, re-fixturing, and machine-to-machine transfers. Consolidating tactile, video, and laser work into one system also reduces operator handling, lowers capital tied up across multiple CMMs, and eliminates alignment errors that come from moving parts between separate platforms.
Tactile scanning is best for datums, bores, freeform geometry, and high-accuracy contact probing. Telecentric video is best for very small features such as micro-holes, sharp edges, and delicate or hard-to-probe surfaces. Interferometric laser is best for capturing dense surface data, gaps, and reflective or complex contours. On FlexPoint, all three can be combined within a single program for a single part without interrupting the routine.
FlexPoint is engineered for shop-floor production environments, not only controlled lab conditions. It uses rigid construction with precision materials, air bearings on all axes for smooth and stable motion, and active temperature compensation to maintain accuracy as ambient conditions change. This allows the system to deliver repeatable multisensor measurement performance close to where parts are actually produced.
FlexPoint is designed and built in the United States by Optical Gaging Products (OGP), part of Quality Vision International (QVI). OGP is the same company behind the SmartScope video measurement and ShapeGrabber 3D scanning product lines. In Canada, FlexPoint is sold, installed, supported, and calibrated by CMMXYZ, OGP's authorized partner.
The most reliable evaluation is a sample part demonstration. Send CMMXYZ a CAD file or a representative part, and a full multisensor inspection routine will be built and run on FlexPoint with a detailed report covering cycle time, workflow efficiency, and measurement results. That benchmark can be compared directly against your current process to quantify setup reduction, cycle-time improvement, and accuracy gains.
